Evga 3060 Ti Xc Mining Settings

We've tested and played around with a couple of Nvidia GeForce RTX 30 series of GPUs already, then that we can compile a list with the optimized mining settings for mining Ethereum with RTX 3060 Ti, RTX 3070, RTX 3080 and RTX 3090 GPUs. There could of course be some variation from carte du jour to card due to manufacturers making different versions with higher TDP levels and higher default clocks, simply generally the settings below should work pretty good on whatsoever make and model from the above mentioned ones.

Some further tweaking could aid in maximizing operation or optimizing ability usage for a specific bill of fare, but the settings we give here should be a very good starting point for achieving optimal operation at reduced power usage when suing them for mining Ethereum (ETH). Do note that the settings below are intended for Ethereum mining and/or other memory intensive crypto algorithms such as VertHash for instance, the settings are nigh likely not optimal for mining use where a GPU-intensive algorithm is in play!

Nvidia RTX 3060 Ti Optimized Mining Settings:
– TDP: 60% / 140W
– GPU: -500 MHz
– VRAM: +1100 MHz
– ETH Hashrate: lx MH/due south
– More on Gigabyte AORUS GeForce RTX 3060 Ti Principal…

Nvidia RTX 3070 Optimized Mining Settings:
– TDP: l% / 140W
– GPU: -500 MHz
– VRAM: +1100 MHz
– ETH Hashrate: 60 MH/s
– More than on Palit GeForce RTX 3070 GameRock GPUs…

Nvidia RTX 3080 Optimized Mining Settings:
– TDP: 71% / 230W
– GPU: -300 MHz
– VRAM: +m MHz
– FANS: 100%
– ETH Hashrate: 97 MH/south
– More on ASUS TUF Gaming GeForce RTX 3080 Video Cards…

Nvidia RTX 3090 Optimized Mining Settings:
– TDP: 73% / 300W
– GPU: -400 MHz
– VRAM: +1000 MHz
– FANS: 100%
– ETH Hashrate: 120 MH/s
– More than on MSI GeForce RTX 3090 SUPRIM Ten 24G GPUs…

* The clocks cited higher up are for utilize with a tool such equally MSI Afterburner, overclocking the video memory in other tools might crave the use of a different number for the same amount of clock increment +2000 MHz for the memory instead of +thousand! The TDP level tin also be set in Watts instead of percent level from the default 1, so we also cited an estimated power usage in Watts besides.

An important tip especially for Nvidia GeForce RTX 3080 and RTX 3090 GPUs is to always run their cooling fans on 100% while mining Ethereum, even though the GPU temperature may exist low. The reason for that is to help proceed the retention chips cooler, considering the GDDR6X memory these GPUs utilize get pretty hot while mining Ethereum specifically and you need to keep it as cool as possible. If it gets too hot you may feel drop in mining performance, resulting in lower hashrate and, so make sure you monitor the operating temperatures of GDDR6X memory you can do so with the useful free tool HWiNFO. With that software tool and more specifically the latest beta version it has y'all can likewise monitor the GPU HotSpot Temperature for Nvidia GPUs as a useful tool to diagnose possible cooling issues on GPUs that are unstable when mining.

If yous manage to keep the memory temperature lower you might fifty-fifty push button the video memory on RTX 3080 and RTX 3080 GPUs to +1100 MHs for some extra performance heave, though in our experience high operating temperatures and high memory frequency does not do well together. The GDDR6 retention used on RTX 3060 Ti and RTX 3070 GPUs does not get then hot and can easily handle +1100 MHz for the video retention in club to reach lx MH/s hashrate mining Ethereum. Information technology is best to try and see what your particular RTX GPUs can handle and non to end them running at the absolute maximum possible operating frequency equally this may cause instability with a slight change in the ambience temperature.

Source: https://laptrinhx.com/optimized-ethereum-mining-settings-for-nvidia-rtx-3060-ti-rtx-3070-rtx-3080-and-rtx-3090-gpus-3268013610/

Share this post